Product Details

HyperDeck Extreme Control

Adding Traditional Broadcast Deck Controls

Overview
The HyperDeck Extreme Control from Blackmagic is a 3 RU, RS-422 connectivity with virtually any type of deck thanks to the traditional deck controls for half-rack width installation. Eight RS-422 ports allow you to control up to eight decks, including legacy decks and the HyperDeck Extreme 8K HDR. Controls include transport, timecode, and deck status buttons plus a large search dial for jog, shuttle, and positioning control. There is a row of eight recorder selection buttons and another row of eight player selection buttons. To protect videotape masters, recording requires pressing both "REC" and "PLAY" buttons simultaneously.The HyperDeck Extreme Control also features a built-in editor for automating the ingest of legacy videotape-based programming.

Features
Two HyperDeck Extreme Control units, or one unit plus one HyperDeck Extreme 8K HDR, can be installed in a rack or console using the optional HyperDeck Extreme Rack Kit.

Automate Editing between Tape and HyperDeck
The built-in editor allows deck-to-deck editing. Operating the same way as traditional decks, the HyperDeck Extreme Control can control legacy decks and the HyperDeck Extreme 8K HDR from the same front panel. To edit old videotape simply press the "PLAYER" button, enter in and out points on the tape, select the recorder, and press "EDIT". The HyperDeck Extreme Control will now cue and play the broadcast deck while recording on the HyperDeck.

Traditional and Elegant Transport Controls
You get familiar transport controls such as "PLAY", which when pressed during recording, will cause the recording to stop and play the same point. To start a recording, press both "REC" and "PLAY" buttons simultaneously.

Premium Search Dial for Jog and Shuttle
The high-quality search dial features both jog and shuttle control and has an electronic clutch that stops at the end of the shuttle. HyperDeck Extreme Control replaces the hyperdevice with a fast positioning function. The search dial uses twin bearings.

Full Timecode Display and Deck Status
Full deck status is provided on a large timecode display. This display shows the timecode of the current selected deck, and the timecode source switch will control what's displayed on the time counter. The horizontal light bar provides a visual feedback, which is important when working with remote decks. The servo indicator light will show when the deck is in play or record mode and the servo system is correctly locked. Because remote decks will still display the time counter and transport state, the remote indicator will let you know if the deck is in remote. There's even an external video reference status.

Flexible In and Out Point Entry for Editing
For editing, you need to enter an in and out point for the remote deck. Simply select the "IN" or "OUT" button and the "ENTRY" button simultaneously to enter the points. To display each edit point on the time counter display, simply press "IN" or "OUT" button only and the time will be shown. While the entry button is used for entering or out point data, you can also clear the in and out points by pressing the "IN" or "OUT" button while pressing "DELETE". To trim edit points, you can press "TRIM" + or - button while pressing the "IN" or "OUT" button, and you will advance or delay the edit point by one frame at each press.

Pre-Roll Edits to Cue Decks
A pre-roll button is provided for cueing decks. When this button is pressed, the tape machine will run to the pre-roll point, which is generally five seconds before the in point. If you are using an older broadcast deck, it could take a few minutes for the deck to get to the cue point as the machine has to spool the tape. If the "PREROLL" button is pressed simultaneously with the "IN" or "OUT" button, then the deck will cue to the specific in or out point.

Perform the Edit Automatically
Once you have your in and out points set, you can perform the edit by clicking the "EDIT" button. If this button is pressed before the point, the current tape position will be automatically entered in the point, and then the editing will be performed. This means you can select the "EDIT" button and it will set the in point and then perform all in one step.

Specifications

Deck Control Outputs                                   8 x RS-422

Reference Input                                            Tri-Sync or Black Burst

Reference Output                                         Follows Reference Input

Ethernet                                                        1 Gb / s

Computer Interface                                       1 x USB Type-C

Control Protocols                                           Sony

Internal Software Upgrade                             Loaded at System Start or via Blackmagic HyperDeck

                                                                       Setup Using USB Port

Operating System Support                             Mac 10.13 High Sierra, 10.14 Mojave, or later

                                                                       Windows 8.1 or 10

Display                                                           8-Digit, 7-Segment LED Timecode Display

Power Supply                                                 1 x Internal 100 - 240 VAC

                                                                       1 x 4-Pin XLR 12 VDC

Operating Temperature                                  32 to 104 ° F / 0 to 40 ° C

Storage Temperature                                     -4 to 113 ° F / -20 to 60 ° C

Relative Humidity                                            0 to 90% Non-Condensing

Rack Compatibility                                          3 RU, Half Rack Width

Packaging Info

Dimensions                                                 8.3 x 5.1 x 13.8 "/ 21 x 13 x 35 cm

Weight                                                       3.5 lb / 1.6 kg

What's In The Box

·          Blackmagic Design HyperDeck Extreme Control

·          SD Card with User Manual

Payment

1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)

2. Payment via PayPal account : PayPal verified account is required.

3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.

4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.

5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)

 For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.

*Important: All Prices in the website are subject to change without prior notice

Shipping

• Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
  Covered destinations : Nationwide
  Shipping cost : may vary on destination and purchase amount
  Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
  Shipment bound for EMS premium regions : The customer may be required to pay additional cost.

  *Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.

  
  

   International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.

  
  

Returns & Exchanges

  Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.

Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
-       Sold out products
-       Wrong item delivered
-       Defective products

-       Shoddy Goods

Ineligible for returns and exchanges:
-       Products with customer-induced damages
-       Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
-       Change of mind

* (Please contact us or Email customer service for details)

Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.

The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects. 

The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.

>Warranty

channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.

If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.

Product Inquiry