Product Name | 286S |
---|---|
Brand | DBX |
Sale Price | Php 16,000.00 |
Mileage | Points :160.00 |
수량 | |
Product Code | P0000IYP |
Product Details | Microphone Preamplifier/Processor |
QR Code |
Product promotion via SNS |
|
---|
Shipping Cost Payment Options: 1."To be Paid on Delivery" Shipping is still limited to some areas in Visayas and Mindanao via AP Cargo.Shipping Cost may be paid by cash to courier (door-to-door) or upon branch pick-up. Service may expand nationwide in the nearfuture; 2."Pre-pay" Shipping covers countrywide (Philippines). Shipping cost needs to be settled with the item cost prior to shipping of the package. Product Availability: Some products are provided on a per order basis and could take 3-5 weeks to be available upon order.Kindly inquire for the availability of the items. |
(Minimum Order : 1 or more / Maximum Order 0 or less)
Size Charts
Mic Preamp Connector |
XLR Floating balanced, Pin 2 Hot |
Mic Preamp Input Impedance |
~ 4.2kΩ |
Mic Preamp gain |
0dB to + 60dB |
Mic Preamp Phantom Power |
+ 48VDC, applied to XLR pins 2 and 3 through 6.81kΩ resistors |
CMRR |
> 40dB, typically 55dB |
Mic Preamp max input level |
0.2Vrms, Gain = 30dB |
Mic Preamp Equivalent Input Noise (EIN) |
-125dBu, 22Hz-22kHz, 150Ω source impedance |
Input Connectors |
(Line) Floating balanced, TIP Hot |
Input Impedance |
(Line) 10kΩ unbalanced, 20kΩ balanced |
Max Input |
(Line)> + 21dBu, balanced or unbalanced |
Input Gain Range |
(Line) -15dB to +45 dB |
Insert Connector |
1/4 "TRS: Normalled; tip is Send, ring is Return |
Insert Impedance |
> 5kW (Ring-return); 100 ohm (The send-tip) |
Insert Max Level |
> + 21dBu; > + 20dBm (the Load-tip 600) |
Insert Noise |
<-84dBu, Unweighted (20Hz-20kHz); LINE SET Control GAIN to 0dB |
Insert Distortion |
<0.01% THD, 20Hz-20kHz, + 10dBu |
Output Connectors |
1/4 "Balanced / Unbalanced TRS Connectors |
Output Impedance |
100Ω unbalanced, 200Ω balanced |
Max Output |
> + 21dBu,> + 20dBm (600Ω load) |
Gain Adjustment Range |
-30dB To + 10dB |
Noise |
<-80dBu Unweighted (20Hz-20kHz); Both Gain SET Controls for 0dB, Processing Trade shows All the Controls OFF |
Frequency Response |
20Hz to 20kHz, +0.5, -0.5dB |
THD |
<0.08% THD, 20Hz-20kHz, + 10dBu, all Processing Controls OFF |
Compressor Threshold Range |
-40dBu To + 20dBu |
Compressor Threshold Characteristic |
OverEasy® |
Compressor Ratio |
> 4: 1 For input levels beyond 20dB above threshold |
Max Compression |
30dB |
Compressor Attack Time |
The Dependent-Program; > 1S for the Small Level Increases, down to 10ms for larage Increases |
Compressor Release Time |
The Dependent-Program; the Adjustable between approximately 1dB / sec and 75dB / sec |
Compressor Distortion |
Typically <0.05% THD, 20Hz-20kHz, 15dB G / R, + 10dBu Output, DENSITY @ 0 |
IMD |
SMPTE: <0.05%; 60Hz / 7kHz 4: 1, 15dB G / R, Output Level + 10dBu, DENSITY @ 0 |
De-esser Characteristic |
Wideband Gain Reduction |
De-esser Frequency Range |
800Hz to 10kHz High Pass, 12dB / octave |
De-esser Release Time |
12dB / The Dependent-the Octave Program; approximately 1mS / dB |
Enhancer HF Detail Characteristic |
Program-controlled shelving equalizer, approximately 15dB maximum HF boost |
Enhancer LF Detail Characteristic |
Bell-shaped boost @ 80Hz, bell-shaped cut @ 250Hz, ratio is approximately 2: 1 |
Expander / Gate Threshold Range |
OFF to + 15dBu |
Expander / Gate Ratio |
Adjustable 1.5: 1 to 10: 1 |
Expander / Gate Max Depth |
> 50dB |
Expander / Gate Attack Time |
Program-Dependent, approximately 2mS (at maximum attenuation) |
Expander / Gate Release Time |
Program-Dependent, approx. 10mS/dB |
Expander / Gate Dynamic Range |
Typically 105dB |
Power Consumption |
15W |
Operating Voltage |
DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50 / 60Hz |
Operating Temperature |
0 °C to 45 °C (32 °F to 113 °F) |
Dimensions |
1.75" x 5.75" x 19" (4.5cm x 14.6cm x 48.5cm) |
unit weight |
4.5 lbs / 2.04 Kgs |
Shipping Weight |
6.54 lbs / 2.97 Kgs |
1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)
2. Payment via PayPal account : PayPal verified account is required.
3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.
4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.
5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)
For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.
*Important: All Prices in the website are subject to change without prior notice
Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
Covered destinations : Nationwide
Shipping cost : may vary on destination and purchase amount
Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
Shipment bound for EMS premium regions : The customer may be required to pay additional cost.
*Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.
International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.
Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.
Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
- Sold out products
- Wrong item delivered
- Defective products
- Shoddy Goods
Ineligible for returns and exchanges:
- Products with customer-induced damages
- Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
- Change of mind
* (Please contact us or Email customer service for details)
Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.
The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects.
The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.
>Warranty
channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.
If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.