Product Name | IPS 3700 |
---|---|
Brand | RCF |
Sale Price | Php 69,000.00 |
Mileage | Points :690.00 |
수량 | |
Product Code | P0000TKC |
Product Details | Power Amplifier (1,500W) |
QR Code |
Product promotion via SNS |
|
---|
Shipping Cost Payment Options: 1."To be Paid on Delivery" Shipping is still limited to some areas in Visayas and Mindanao via AP Cargo.Shipping Cost may be paid by cash to courier (door-to-door) or upon branch pick-up. Service may expand nationwide in the nearfuture; 2."Pre-pay" Shipping covers countrywide (Philippines). Shipping cost needs to be settled with the item cost prior to shipping of the package. Product Availability: Some products are provided on a per order basis and could take 3-5 weeks to be available upon order.Kindly inquire for the availability of the items. |
(Minimum Order : 1 or more / Maximum Order 0 or less)
Size Charts
Overview:
IPS Series is a range of two-way professional amplifiers that combines high quality performance and reliability with the latest power amplifications technologies.
Features:
Applications:
1.) POWER switch - Push to turn on / off the amplifier. Before switching the amplifier on, check all cables and turn fully counterclockwise both channel level controls 3 .
2.) POWER LED - When lit, the amplifier is switched on.
3.) Control (one per channel) to adjust the output level of the respective amplifier channel. Turn clockwise to increase the output level (0 dB = max. level), turn counterclockwise to decrease. If the amplifier is set to BRIDGE mode, use the channel 1 control only.
4.) FAULT LED (one per channel) - When lit, it indicates the internal protection intervention (due to overload, short-circuit, thermal drift, fault) and the respective channel is muted .As soon as the problem is solved, this LED will be dark. When turning the amplifier on, this LED stays lit for three seconds
5.) CLIP LED (one per channel) - It blinks when the signal level reaches the clipping point, causing the limiter intervention of the respective channel. If it stays lit continuously, the input signal level is excessive.
6.) SIGNAL LED (one per channel) - When lit, it indicates the signal presence (above –40 dBu) at the respective input.
Rear Panel Features:
7.) CH1 INPUT - Channel 1 balanced audio input (female XLR connector).
8.) CH1 LINK - Channel 1 balanced parallel audio output (male XLR connector). This output is linked in parallel with the channel 1 input and is useful to link another amplifier.
9.) CH2 INPUT (STEREO MODE ONLY) - Channel 2 balanced audio input (female XLR connector).
10.) CH2 LINK - Channel 2 balanced parallel audio output (male XLR connector). This output is linked in parallel with the channel 2 input and is useful to link another amplifier.
11.) MODE switch - Before turning the amplifier on, set the amplifier mode selector to the right position among BRIDGE, PARALLEL (mono) and STEREO.
12.) SENSITIVITY switch - Set the sensitivity switch to either 0.775 V or 1.4 V, which is input signal voltage required to get the maximum power output from the amplifier.
13.) CH 1 OUTPUT - Channel 1 output to loudspeakers (SPEAKON connector). If the amplifier is set to BRIDGE mode, only connect this output
14.) CH 2 OUTPUT - Channel 2 output to loudspeakers (SPEAKON connector). Do not use this output if the amplifier is set to BRIDGE mode.
15.) Power cord input. - Connect the power cord only to a mains socket outlet with a protective earthing connection.
16.) RESET push-button - Push this button to (try to) reset the amplifier when is muted due to the thermal protection.
Operation Modes:
Make sure the amplifier is switched off before setting the MODE switch to STEREO. In stereo mode, both channels operate independently and each front panel level control affects its respective output. Minimum load impedance is 4 Ω per output. Loudspeakers shall be connected to the outputs 1 (left channel) and 2 (right channel).
Make sure the amplifier is switched off before setting the MODE switch to PARALLEL. In mono mode, both channels are linked to input 1 (therefore receiving the same signal). Each front panel level control affects its respective output, allowing you to set (if necessary) different levels. Minimum load impedance is 4 Ω per output. Loudspeakers shall be connected to the outputs 1 and 2.
Note that only the amplifier inputs are linked in parallel. This is NOT an output parallel mode. Never connect both outputs in parallel!
Make sure the amplifier is switched off before setting the MODE switch 11 to BRIDGE. In ‘bridge’ (mono) mode, both amplifier channels work with the same input signal, but with inverse phases. The result is a doubling of the output voltage in order to get a double power (on a double impedance load).
Connect the CH 1 input and output only.
The output level is adjusted only by the channel 1 front panel control. Pay attention to the output SPEAKON wiring: pin 1+ positive, pin 2+ negative.
Minimum load impedance is: 8 Ω.
INPUT SECTION
OUTPUT SECTION
SYSTEM PARAMETERS
POWER REQUIREMENTS
PHYSICAL SPECIFICATIONS
1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)
2. Payment via PayPal account : PayPal verified account is required.
3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.
4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.
5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)
For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.
*Important: All Prices in the website are subject to change without prior notice
Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
Covered destinations : Nationwide
Shipping cost : may vary on destination and purchase amount
Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
Shipment bound for EMS premium regions : The customer may be required to pay additional cost.
*Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.
International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.
Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.
Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
- Sold out products
- Wrong item delivered
- Defective products
- Shoddy Goods
Ineligible for returns and exchanges:
- Products with customer-induced damages
- Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
- Change of mind
* (Please contact us or Email customer service for details)
Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.
The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects.
The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.
>Warranty
channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.
If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.